Jeep Transfer Case: NP208
The NP208 has a aluminum case and an appearance similar to many
other chain driven New Process transfer cases. It should have a
tag on the back saying New Process Gear, Model 208. It is chain
driven transfer case with a 23 spline input and standard round
bolt pattern. The output for the front driveshaft is on the
drivers side. Low range is around 2.62 and high is 1.00.
Full size Cherokees used the NP208 from '80-'83 and the J-trucks
used it from '80-'86 or '87. The NP208 was the "Command-Trac" option
for full size Jeeps during this time period.
Last modified Wednesday, 01-Dec-2010 09:13:56 MST
Jeep Tech Main Page |
Terry's Jeep Page
Copyright © 2001, 2000, 1999, 1998
All Rights Reserved, All content with exception of private works and
corporate trademarked logos are property of Jeeptech.com