|
Jeep Winches: Koenig Dana 18 PTO Adapter
 |
This is how the Koenig Dana 18 PTO adapter looks from behind. The
adapter would bolt on at a slight angle so that the shift lever
would be more upright.
|
 |
From the side you can see how relatively thin the adapter is. A
small chain inside the aluminum case takes power from the drive gear
and transfers it to the PTO shaft gear.
|
 |
Here is a front view of the Koenig Dana 18 PTO adapter. The light
area is the input shaft for the adapter, the output is on the right.
|
Last modified Wednesday, 01-Dec-2010 09:10:10 MST
[
Jeep Tech Main Page |
Terry's Jeep Page
]
Copyright © 2001, 2000, 1999, 1998
JEEPTECH.COM
All Rights Reserved, All content with exception of private works and
corporate trademarked logos are property of Jeeptech.com
| 
